You are here

General

186 crankshaft?

goodaye to all
My question arises from a conversation with a mate as i am rebuilding a 186 for a hq ute he reckons a crank from a 221 ford will fit and give it a stroked effect, has anyone heard of this modification ?

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

After All It Could Be An Astra

Hello, Im after some help please. I have an N12 Pulsar (82-85 Astra), and (I would just like to add, MASSIVE HOLDEN FAN, I have me one!!) I'm experiencing hesitation at take-off. What actually happens is, as I go to take off, she tries to stall and then putts along on three cylinders, then after she hits 2500 rpm she takes off like a rocket. If I load her up hills in third(auto) she's doung about 2200 and she wil start to surge and cut out momentartly.
I have renewed the Carby and replaced the pionts and plugs, I run her on Premiunm ULP (optimax or BHP Premium) at 5 Degres ATDC, the dizzy has no cracks and the coil's not over heating and the leads are in good order. I'm at my wits end here, I know one of you Holden lovers would have come across this once before?? Oh and no water in the tank.
Please any help would be of great benifit.
Thanks Paul

P.S I know this is an OldHolden site but anything a day old from new is considered OLD!'

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

LJ front breaks

I have a 1973 LJ Torana with drum breaks all round, my breaks keep adjusting them selves up, what is causing this to happen? I want to fit disc breaks on the front. Do LH Torana disc fit straight on?

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

LJ Torana 173 rough running

Gday all,

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Speedo place

hey guys does anyone know of a speedo place in or near canberra, or maybe sydney. thanks
jevo

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

jap crap

hey im doin up my van, and im starting to research engine mods, and one of my mates just bought a half cut of a toyota chaser with a 2.5 straight 6 with twin turbo, would i be shunned if i managed to put something like this in my hj. i have never seen a holden with a jap engine and im not sure how well it would go down with other holden guys. the engine would kick some ass but yeah its jap?? tell me what you think. thanks

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Which Red Motor?

I am going to rebuild a red motor and would like to know which is best.
I have heard some say its better to rebuild a 186 than the 202 why is this?

I will be using a yella terra head.
A mild cam Im keeping it auto (Im to lazy to change gears)

Any info would be helpful.

Ron

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

The Back Shed is not dead...

Its been a while coming but The Back Shed is back.... Now brought to you from the other side of the world! Theres still all the old holden stuff along with new south american shed stuff!!

Check it out at www.oldholden.com/thebackshed

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

flywheel red 186

can any tell me how much meat can be taken of a red motor fly and what procedures need to be followed

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Help with a HB Torana

Hi my brother is looking for a compleate and running HB Torana, any body type or style, will concider anything even parts. send a email too.
bwilson49@hotmail.com

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

EFI 5.0L

Hello to all my fellow holden drivers out there. Does anyone know where i can pick up an injected 5.0L and possibly computer in perth. I am looking at putting one into my kingswood as it is beginning to get restored. The car goes into the panel beaters in about 5 weeks and so as i am pulling out the motor and all that i might was well put something a little more beefy back in. Any info with names or websites would be most appreciated. Thanks
Matt

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

vh sle ohms question

Hi all,
I got a vh sle 4.2, I wanna put a fuel (level) taco in, but must find out how many ohms my fuel tank is when empty and how many when full. Been asking everywhere cannot get any answers. Can any one help me?

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Electronic Dizzy

Can someone tell me if there is an electronic dizzy that fits the Gemini Isuzu engine,cause i would like to get rid of the points system,thanks.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Wedding Car

Hello, Being a fan of old holdens I would like to have an old EJ/EH pick my wife & up from our wedding reception and drop us off at the hotel - Mossman to Circular Quay - 6pm Sat 21st September. I will pay for it!! Can anyone offer their services? Please email at DBarker@msben.nsw.ed... Cheers Darren Barker

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Torana rear seat

Does anyone know if the rear seat from a hatchback LX Torana can be fitted into an LX sedan? Thanks.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

EFI or Carby??

I currently have a VH Sle Commodore wid a painted blue 202 in her, i was just wondering wether what would go harder..... A Blue 202 wid EFI or just a 350 Holley or something??

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Trimatic gearboxes

Does anybody know if the first digit (A or B)on the serial number plate on a trimatic is wether it is a 253 or 308 gearbox.
or can you tell any other way if the plate has the HO or HP worn off it. Does anybody know what has to be changed to convert from a 253(HO) to 308(HP )trimatic.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

free advertisment for car parts

can anyone tell me a good web site in australia for advertising misc car parts for free? mostly valiant stuff.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

202 Blue Head on Red bottom end

Hi All,
I have picked up a decent 202 red bottom end and wish to run a blue 202 head for the better flow and at the fact i will be running tripple webers. Someone told me i may have to block off some of the water galleries and create some new ones. Is this true and if so, where can I find out what has to be done exactly. I have access to and can competantly do mods myself.

Any advice appreciated and can be mailed to grumpy@hyp.com.au or posted for all.

thanks
Brendan.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

mig welder wanted

I am after a s/hand duel perpose (gas/gasless)240 volt mig welder, so I can start the resto on my HQ GTS.Iam on a limited budget so around the $200 mark would be great, so if you have one and are interested in selling, post here with some specs and ill get back to you soon. Thank's all....'

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Pages