You are here

HR / CELICA 5 SPEED crossmember

Hi Guys, which box crossmember do I use when putting a Celica 5 speed into my HR? Auto, Crash box ???? Have been told differing tales..
Cheers.......Brian

Model: 
Engine: 
Section: 

Comments

for the celica 5 speed in mine i am using a custom one, pretty sure you will have to modify one which ever you choose

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

you have to use a custom one as the one for the auto and manual have to be changed to suit CRS has them.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Daniel

>Email Button

A Toyota five speed mount sits about 5cm foreward from a Holden gearbox mount.
Try and get an original Toyota crossmember if you are making your crossmember. They are only about 35cm long.
CRS cut the middle from the Holden crossmember and put a vertical 5mm steel plate on the cut ends. They then put a 5mm horizontal steel plate in the middle ( replacing the cut out Holden section) welded to the vertial plates with bolt holes for the Toyota rubber mount.
It would be better if you could use a cut to size Toyota crossmember in the middle. It would be stronger and you could retain the bounce limiter in the mount.
David

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Old is good.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.