cush washer for banjo dif...
By 02mick 16/03/10@22:43
went to pick up a diff from the wrecker and got it for half price because it needed a rebuild so went straight to work, pulled the lot apart and in the parts washer order a new bearing kit
happy camper so far everything looked good but the crush washer on the input shaft is unusable anymore i cant lock up my yoke while maintaining proper preload, when i now lockup the yoke i lockup the bearings as well !!
and guess what no freaking crushwasher in perth
so iam hopping anybody here can help me out..
anybody any idea's ?
thanks mick
cush washer for banjo dif...
Shim the crush washer, you can put a shim on the top of the spacer(app 20thou or .5 mil) and this will help your situation..
crush washers have been
crush washers have been unavailable for years, the rebuilders save the old ones and swap them around to suit.
crush washers have been
crush washers have been unavailable for years, the rebuilders save the old ones and swap them around to suit.
crush washers have been
crush washers have been unavailable for years, the rebuilders save the old ones and swap them around to suit.
Post new comment