You are here

gearbox work?

hey all out there in holden world. just wondering if anyone has been successful of late bolting a t5 behind a hx era 308? if so how much work is involved??? i need to try and change my m21 but dont really need to spend alot of time doing it. any help great thanks guys.

Model: 
Engine: 
Section: 

Comments

Its do-able. Speak to CRS or Dellows for a kit. Will include bellhousing, crossmember, mounts, etc. You will need to get your tailshaft modified too. A small section needs to be cut from the rear of the original trans hole in the floor also. You can also use a ford T5.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I've put one in my ute and am very happy with it. As sandman says, CRS or Dellows can help with the kit, but you'll need to know what sort of box you're going to use, as there are a lot of versions around. I used a 6cyl Ford one, because it has the shortest input shaft, meaning you don't have to cut as big a hole.

Also, Dellows will sell you a piece to modify your existing crossmember, whereas CRS also does a complete replacement crossmember, which is what I got.

Cheers, Steve.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.