You are here

WB Van light switch, the light blue wire

Hi All

WB light switch pin outs, I have one light blue wire, any one know which pin it connects to?

Pin == wire colour : function
1 == 2x Orange: hazards, horn, starter, etc
2 == Green : brake lights
3 == empty not sure
4 == Yellow : clock and illumination + internal lights ash auto etc
5 == 2x Orange : hazards, horn, starter, etc
6 == empty not sure
Not numbered == 2x white wires : left right door courtesy

Missing is where I connect the light blue wire, as best I can tell its function is connects to the combination switch, I think this works headlights, parkers etc, but which pin on switch, 3 or 6 ?
Possibly 3 which shares same copper pad as 4.

Thanks in advance.

Model: 
Topic: 
Engine: 
Section: 
AttachmentSize
Image icon Wb light switch connector5.5 MB

Comments

looking at a WB commercial wiring diagram for internal illumination it has a light blue wire running from the light switch to the wiper dimmer switch connector which then has a light blue/black wire to the wiper dimmer switch. That light blue wire connects to the pin next to the yellow in your photo. If I interpret the dwg right and align the light switch pin numbers with the plug it lines up with pin 6

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.