You are here

Hq power steering hoses.

Hello everyone. I have a complete power steering set up for a six cylinder but not the hoses. It's a imperial pump and i was wondering if anyone has the lengths for both hoses so i can make new ones. Thanks.

Model: 
Topic: 
Engine: 

Comments

The same part number is used on 6 cyl & 8 cyl ( but not on 350 chev ) power steering , I have measured my V8 as follows :-
pressure hose is 330mm length of braided piece including crimps but not metal tube elbows.
return is 450mm total hose length.
measured using length of wire to follow bends and get more accurate figure , you have plenty of tolerance as only movement is via engine mounts so as long as your made up ones not shorter than those figures you will have no dramas.

if you don't have them original the part numbers are :-
Pressure hose 2825687
return hose 2817879

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.