You are here

HX Emissions wiring

I have a HX ute and the emissions wiring from the firewall has been cut. Does anyone know what colour wires will go to the cold feed switch and vacuum solenoid on the thermostat housing. 202 engine photos would be great.

Model: 

Comments

the cold feed switch has 2 light brown wires (when the temp is above a certain value it just closes and connects the two wires together), one of those light brown wires goes to the transmission control switch (which provides the circuit with an earth when it top gear) and the other light brown one to the distributor vacuum advance solenoid the TCS solenoid also has another light brown wire which connects to the anti-dieseling solenoid and to the engine harness connector where it attaches to a pink wire which is connected to the fuse panel for 12V. So when the cold feed switch and transmission switch are closed they earth the TCS solenoid which has 12v to it and then allows ported vacuum to the distributor. You could just connect ported vaccuum from the carburetor to the distributor and not worry about any of the other parts.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.