You are here

LJ Ign. switch diagram for Robbo..

Model: 
Engine: 
Image: 

Ok....lets see if this works...I post some more info if it does :)
Q-ball.
"Clay is for racing on,Tar is how you get there!!"

Comments

OK..it did work!...sorry I dont have a switch in front of me, I'm hoping your switch has the terminals numbered.
Looking at the pic...top lh corner. Terminal #5 to starter (purple)
Top Rh corner. Terminal #12 to coil when "cranking" (yellow)
Upper middle LH. Terminal #51 from battery (fat red one!)
Upper middle Rh. Terminal #11 to coil "ign. on or running" AND fuse box..both pink wires..one is a resistance wire (has silver writing? on it)this is the coil wire.
Lower middle LH. Terminal # 52. not used.
Lower middle Rh. Terminal #A. Acessories to fuse box (brown)
Lower Lh. terminal #61. to temp sensor ONLY if you DONT have a Gtr dash (green).
Lower Rh. Terminal #62. not used.
Hope that helps.....sing out if you get stuck :)
Q-ball.

"Clay is for racing on,Tar is how you get there!!"
[http://gallery.oldho...|My Shed]

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Q-ball.

"Clay is for racing on,Tar is how you get there!!"
[http://gallery.oldho...|My Shed]
3401

That is awsome.

I am very thankful for your help, I will post back and let you know how I went.
Cheers
Robbo

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.