You are here

WB VB VC VH Power Steering Pump Bolts & Spacer Sizes

Model: 
Topic: 
Image: 

Hi all,

Can anyone tell me what the lengths and thread sizes are for each of the bolts and spacers which are used to mount a power steering pump to the drivers side of 202 (WB VB VC VH) block ?

I've misplaced mine and the power steering pump is the last thing to mount before before turning the key.

Any help would be much appreciated.

Comments

If they are the bolts they look to be 5/16 and 3/8 diameters and UNC threads.
But could also be a metric thread (8 and 10 mil dia)as I am not sure if Holden changed to metric threaded bolts in that era.
Maybe get some bolts in the above sizes and try them in the block.
Hope this helps.

Cheers, Mick

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Will do. Cheers mate!

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Im doing the exact same but I need to find or make the spacers...

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I did find out what size the spacers were about a year ago from digging around a bit.

I had a couple of the spacers already and was short only 2, so I got the measurement and put a bunch of washers together until I was at the right length for the spacers.

Haven't had any trouble with it!

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.