You are here

Window adjustment- Sunday afternoon job

Passenger window on the wb ute is coming out of its track, as I wind up it keeps tilting forward and wont rise level. Have pulled the front channel in as far as it will go and doesn't help. I've adjusted all the bolts up and down now. Help appreciated. cheers Dave

Model: 
Topic: 
Engine: 
Section: 

Comments

the window regs used to do that if either the slides at the bottom of the glass were coming out of their tracks, or the regulator itself was worn out, or the adjustment on the regulator and glass positioning is out. Loosen the window reg assembly where it is mounted in the inner door skin. check all window arm rollers are located in the run channels and can move freely. pull the glass tightly into the window rear run channel,then move the regulator downwards to remove excess clearance, and at the same time maintain a horizontal attitude on the regulator. adjust any excess clearance in the front run channel, tighten all bolts, then test. it is also ok to add a smear of white grease to all slides and give the regulator cam a drop of oil, as this helps ease the load on the whole mechanism.

I hope this helps.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

If your project doesn't work, look for the part you didn't think was important.

One should forgive one's enemies, but not before they are hanged

mckackie

Ill pull it out next weekend and have a play. cheers Dave.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.