You are here

sender units

i am putting the 308 in the newly acquired hz this weekend, i have removed my gts dash out of my green beast and i am aware that i need the gts sender units and gts loom to suit the gts dash, now the question is do i need the fuel sender unit as well to suit the gts dash or are they the same?

Model: 
Topic: 
Engine: 
Section: 

Comments

Hi, I had the same problem with my one tonner, i didnt use the gts wiring loom as i just cut the wires and re joined them, you will need to get the fuel sender unit and the fuel gauge calibrated to work properly, and this is the part where its tricky coz mines a HQ and yours is a HZ, so i dont really know the wiring for them, anyways good luck, hope it helped

cheers

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

if the other dash is from a hz then all senders including will be fine. unless you have just the senders for th idiot lights than you will require a water a oil temp sender for guages. they changed fuel senders in hq and kept with the same type up till they changed to commodores.same with the oil and water senders they change late in hq as well so anything on wards should be fine

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.