You are here

body mounts

Hi, does anybody out there know how tight to do up the body mount bolts ( torque figure ),I have changed mine,the old ones were pretty squashed, none of them were too tight but I guess they would slacken off as the rubber flattened over the years of bouncing around. None of the DIY manuals go to that area.

Cheers Rod

Model: 
Topic: 
Engine: 
Section: 

Comments

I can't find the figure for the Sedan/Wagon/Stato models, but for the Ute/Van/Tonner models the figure given in the GMH manual is 30 - 45 ft lbs for all vertical mounts.

HTH...Dave

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Cheers...Dave

"Search more, Post less"

>E-mail Me
Qute's Shed

According to the HQ service manual (and I can't find any ammendments to this in the HJ supplement), the body mount bolts are torqued up to 50 - 60 lb. ft.

Hope this helps you out!

Hairy-Dude.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Cheers,

Hairy-Dude.

Thanks for info fellas, I didn't mention in my post that it is a ute so seems like Qutes' figure may be the one to go with.

Rod

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.