You are here

HG pedal box

I am trying to loosen/adjust my pedal box in HG ute. 186, disc brakes.
The bolt threads for the clutch master dont line up with the holes in the firewall and I want to drill out for a hydraulic clutch.

Trying to wiggle the pedal box to bring them back into alignment but cant get to the brake bracket bolt next to the guard. Is there a trick or do I have to dismantle the booster?
Are there only two bolts here or is there more that I haven't seen? all are on the engine bay side of the firewall as far as I can tell.
The bolt next to the clutch bolts is easy.

If I have to dismantle the booster etc can the master cylinder come off the booster easily or is it sealed to the system?

the pics in the factory manual arent clear enough on this aspect.

Model: 
Topic: 
Engine: 
Section: 

Comments

bolts on RHS of box under the dash as well

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

yep thanks, went and found that and some more too.
theres about 10 holding it in there all up.
my back is now all twisted up.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Craig
____[ \__
~()-----()-\

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.