You are here

question on brake master cylinders

Is it still possible to get rebuild kits for the brake master cylinders , only need the rubber seals mine is leaking from the back

its a PBR p6615 out of my HQ one tonner

or is it easier just to buy one of the after market ones on eBay

thanks greg

Model: 
Topic: 
Engine: 
Section: 

Comments

that should read ,is it easier just to buy a complete aftermarket master cylinder of eBay

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Not sure about kits but you can get them rebuilt.
DO NOT buy an aftermarket unit. You WILL regret it. (I speak from experience.)
Aftermarket units ARE CRAP!!!!

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I bought a PBR seal kit for a HR master cylinder K7122X about 2 years ago..but I never needed it as I just cleaned the bore a little with some fine wet and dry and it's been perfect ever since...a quick search on ebay shows this suitable for HQ tonner
https://www.ebay.com...

K7470X or 210J0197 is the minor kit for that master cylinder listed here

https://www.sparespr...

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.