You are here

strommy settings EH

need a quick lesson to get my strommy set (mixture and idle) and maybe choke cable setting. knew i shouldnt have dicked around with it but now its cold here the eh keeps stalling at every intersection.
thanks in advance

Model: 

Comments

could be a vacuum leak
or the mixture settings wrong
try resetting the mixture screw 1 and a half turns out
spray some crc or wd 40 around the base area to see if the engine picks up
if it does then you have a vacuum leak
also check any hoses attached they might also be leaking or cracked causing rough idle and stalling

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.