You are here

is the passenger side wheel the drive wheel

I am having problems with my left hand axle, is it the drive wheel no:1 question... and number 2 question...it tends to not turn when I tighten down the bolts I can't even turn it to get to tighten the last bolt through the access holes its so tight, I'm a bit confused what the issue is when I could remove it easily, gear shift is in neutral
W

Model: 
Topic: 
Engine: 
Section: 

Comments

it might be binding on the oil seal when you tighten the bolts
causing your problem
make sure its the correct bearing and seal

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

they are the same as when I removed the axle in the first place, I have not replaced them ... so that just adds to my confusion

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

When the bolts are tight there is lotsa movement in the handbrake hub so its binding somewhere

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.