You are here

Workshop manual lingo

Model: 
Topic: 
Section: 
Image: 

Have i read and done this correctly ? I have put the slider pin with rubber to the top of caliper
The HZ workshop manual states ....
.."Fit the guide pin with the rubber sleeve at the trailing end of the caliper in relation to the forward rotation of the wheel"
T.I.A

Comments

well with the drivers wheel rotating clockwise (forward rotation) - as the disc rotates - any point on it will come into contact first at the leading edge of the pad..and then the trailing edge..similar for passenger but the wheel rotates anti clockwise going forward ...so yes looking at the relative position of the front calipers on the Hz the trailing edge will be at the top....

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

They couldn't write that little bit of info any more technically if they tried.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny1
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

"Junk is something you throw out 3 weeks before you need it"

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.