You are here

Dr Terry

or anyone else with a good knowledge base, what other engines if any, be it Four, Six, or Eight cylinders, share the same bell housing bolt pattern as the Holden straight six engines?

Thanks in advance.

Cheers, Mick.

Model: 
Topic: 
Engine: 
Section: 

Comments

they used the starfire engine in the toyotas not sure what
gearbox was used maybe worth a look

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Hi, I am aware of the Starfire having the same pattern as the six. I am hoping there may be something with a bit more cubic capacity than 1.9 litre.

Thank you.

Cheers, Mick.

  • Like0
  • no like1
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

if you are doing a gearbox swap there are several that can use the original holden bellhousing/clutch setup and different box bolted to it. one is celica 5 speed (uses small filler ring) ,another is ford single rail(which even uses the same clutch plate)and pretty sure toploader. both need bellhousing redrilled though.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.