You are here

ARF 206-2802 Fly Wheel Bolt Kit

Hello All,

It has been a long while since I took my fly wheel off and had it resurfaced. I cannot remember if the fly wheel bolts were fitted with washers or not?

Can someone let me know if they need flat washers, spring washers or no washers?

Also what torque settings should the bolts be tightened to?

Kind regards
Lionel

Model: 
Topic: 
Engine: 
Section: 

Comments

no washers on flywheel bolts
65 lbs on a holden red motor

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Which flywheel had the washer plate arrangement with the tabs for bending over the bolt heads.
I thought it was the red motors ??

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

the grey motor had lock tabs on the early ones think it was deleted later
dont recall red motors ever having lock tabs

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

flywheel torque according to various repair manuals I have for a red 6...It specifies 65 ft-lbs sic (technically should be lbs-ft) for a 253/308 and 60ft lbs for a 350

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

I also use a service removable (Blue) Loctite on them.

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.