You are here

hr holden

had the head shaved and weber 34 adm carby redone,the car starts but i have to keep reving it or it will cut out,it wont idle,anyone know what it could be.

Model: 
Topic: 
Engine: 

Comments

sounds like its running too lean, check for air leaks, gaskets (carby and manifold), all outlets connected, idle mixture, choke , clean idle circuit, jets to start with....

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Andrew

Also check the fuel cut off solenoid on the Weber is hooked up and working if it still has one fitted.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Is it getting full fuel. Check filter. Check vacuum leak.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

regards
ONETONMAN

Is the idle solenoid getting 12V with ignition switched on.

Is it plugged in.

Dr Terry

  • Like1
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

blocked idle jet can cause it to stall at idle

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.