You are here

chevy cast numbers

here are some cast numbers for chevy small blocks this is only listing early blocks n stuff it might help some people there is alot more on web
Small Block Chevy Casting Numbers
3970041, 3814660, 3970010, 3914678, 3932386, 3955618 327 1968-69 Corvette, Camaro, and other high-performance applications

3956618, 3970010*, 3932386 350 1968-79 Truck and high-performance applications (4-bolt mains)
* Sometimes machined for 2-bolt mains.

Small Block Chevy Cylinder Head Casting Numbers
3973487 '68-71
'71 350 high performance
350 trucks & passenger cars

transmissions
GM Automatic Transmision Gear Ratios
Transmission Type 1st Gear 2nd Gear 3rd Gear 4th Gear
Power Glide 1.76 or 1.82 1.00
TH350 2.52 1.52 1.00
TH400 2.48 1.48 1.00
700R4 3.06 1.63 1.00 0.70
200R4 2.74 1.57 1.00 0.67
4L60E* 3.06 1.63 1.00 0.70
4L80E 2.48 1.48 1.00 0.75

Section: 

Comments

sorry about the huge post people next time ill do it properly so i dont spam up main page here is some more [Naughty Pottyword]
CHEVY SMALLBLOCK V-8 Crankshaft Casting Numbers

3932442..267,305,350..cast...medium journal...3.48" stroke
1969-85 3932442 305,350 cast large two in 1979-82 267
Pistons
GM P/N ENGINE CR/Chamber CC Dome Type Pin Type Material Usage
12514101 350 8.5:1/76cc Dish P Cast 350/190HP
- 9.1:1/64cc - - - 350/285HP
- - - - - Crate motor
12361371 350 9.1:1/64cc Dish P Cast 350/300HP Crate motor
10104455 350 9.8:1/58cc Flat top P Hyper ZZZ 1St design Crate motor
10181389 350 9.8:1/58cc Flat top P Hyper ZZZ 2nd design Crate motor
12520264 350 9.1:1/64cc Flat top P Cast 350/300HP
3946876 302 11.0:1/64cc Dome F Forged '68 to '69 Z-28
3942543 350 11.0:1/64cc Dome P Forged '69 L46
474192 350 9.0:1/76cc Dish P Cast 350 L82
3989051 350 11.0:1/64cc Dome P Forged '70 LT1
14011020 350 12.5:1/64cc Dome F Forged Heavy-Duty/NOTE 1
14011021 350 12.5:1/64cc Dome F Forged Heavy-Duty/NOTE 2
14011026 350 12.5:1/64cc Dome F Forged Heavy-Duty/NOTE 3
14011027 350 12.5:1/64cc Dome F Forged Heavy-Duty/NOTE 4

P= Pressed-on pin; F= Floating pin., Hyper = Hypereutectic
Part numbers are for standard (Std.) bore sizes.
NOTE 1: use with 5.7" rod in cylinders 2, 3, 6, 7.
NOTE 2: use with 5.7" rod in cylinders 1, 4, 5, 8.
NOTE 3: use with 6.0" rod in cylinders 2, 3, 6, 7.
NOTE 4: use with 6.0" rod in cylinders 1, 4, 5, 8.

Engine ID Code Example: V0101CLJ - (V = Plant, 01 = Month, 01 = Day, CLJ = Engine Suffix Code)
Another example: T0830CTY - (T = Tonawanda, 08 = August, 30 = 30th day, CTY = 1970 396 Camaro, 375 hp, 11.0:1, TH400)
Code Engine Plant Code Engine Plant
F Flint (Motor) S Saginaw Service
H Hydramatic T Tonawanda
K St. Catherines, Ontario V Flint (Engine)
(McKinnon Industries Canada)
M GM of Mexico

Suffix Codes
1973 CLC 350 t/h, 4 spd, NB2 J L48 190 4 Vette 1974 CLC 350 t/h, 4 spd, NB2 J L48 195 4 Vette 1977 CLC 350 a/t, Calif L L48 180 4 Vette

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Another bit of info to compliment your post,
with the eng suffix codes the same code can apply to several vehicles such as the eg CTY is also assigned to chevelle's using the same engine code as the camaro and was an "SHP" option (special high performance).

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Is this in the Holdenpedia?

If not, please put it in there.

Cheers...Dave
>E-mail Me!
Qute's Shed

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Cheers...Dave

"Search more, Post less"

>E-mail Me
Qute's Shed

ok i will do it later ill put all my holley carby stuff there also got loads of crap to post up just been lazy lateley

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

how about this one 350HQ
2m11154vb
its a mexican 4 bolt engine I know but wouldn't mind working out why it starts with a 2 ? and any other info I can get.

Link to the Tunna Build

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

not sure but will try find out

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

can u get a pic i know with VIN number on chasis 2= camaro but im stumped on that one

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

na that and the cast number is all
its a goodwrench hencho en mexico block. (crate motor)

Link to the Tunna Build

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

good one ill pull my finger out i havea bit of chev info list numbers for holleys pacemaker header install instruction sheet ill put what i can in holdenpedia later .....no i wont i was just in there and didnt know how to edit post new stuff so didnt want to mess any pages up i know they r probbly backed up but if anyone thinks any of this crap is relivent and knows what they r doing in pedia go 4 it copy paste it for me coz i dont wanna stuff anything up

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

The vb on the end of the number indicates it was a 1969 350 with a manual trans and fitted to either a c-10 or c-20 pick up, factory fitted with a 4 barrell and rated at 255 hp.
I also have about 300 pages of just casting list's for both small & big block chevs & all head's etc, what they were fitted to & rated hp. This would be too big to put in holdenpedia i would think?
I'm happy to help where i can though.(I'll look into the 2m for you)
Dave

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

ALL of this info is available via MORTEC, please don't act like you have a stash of top secret chev info under your bed.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

DOWNLOADED FROM PACEMAKERS WEBPAGE text

FITTING INSTRUCTIONS TO SUIT
PACEMAKER HEADERS part no. PH 5315 PH 5325

IMPORTANT the engine mount plates play a very important role in the correct positioning of these headers. PACEMAKER will only guarantee fitment if -
1) the original genuine factory engine mount plates are used or
2) PACEMAKER replacement engine mount plates (part no PEMP 350) are used, and
only when the engine mount plates are installed to the correct side of the vehicle.
(the drivers side or right hand engine mount plate is 1 ΒΎ

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

CHEV TO HQ-WB ENGINE MOUNTS
the drivers side or right hand engine mount plate is 1 ΒΎ

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I have just added an album in my shed that contains sbc casting no's for both blocks & heads with their years/capacity/valve specs etc. Only 8 pages now but will add a lot more to it & include big blocks & other handy stuff.
Hope it will help others.
Dave

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

double hump fuelie head casting numbers are already in the holdenpedia.

:)

holley listing numbers are there also.

"Don't be unaustralian...buy an Oldholden.com sticker"

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

[http://gallery.oldho...|The Gts Coupe Restoration]

Cool,
but i've got the option code's and eng id prefix's for every sbc+bbc engine made upto about 1990 to add which is pretty bloody big,I only have them on paper so do you think it's worth scanning & continue adding them to my shed????
Dave

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

hi have some chev heads and wondering what size motor they fit casting numbers are 354434

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Year , cast no , eng , in , ex cc
,

1975-76 , 354434 , 262,305 , 1.72 , 1.3 , 62

visit my shed
>E-mail Me

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Sir, I'm looking at a 69 Chev small block with the following numbers on the front pad [V0906FC] what is it out of? Also, is it a 2 or 4 bolt main?

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Possibly it's a uo not a vo from 69 , that would make it a 2 bolt 307 200hp 4 barrel carbed eng.
What is the casting number at the rear of the block? also the casting number on the heads ?
Then we can tell you more about it.
Unless someone else can verify otherwise.

visit my shed
>E-mail Me

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Hi, I have a 327 with V0602FA stamped on it.I would be grateful for any info. Thanks Chris.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

As this is not an Australian engine number you would be better of looking on a Chev eb site.

MB

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

v= cast in flint Michigan
06= june
02=2nd day of month
FA= 1969 327inch camero

does anyone know what my engine is out of
V0110F0? I know it was cast in flint Michigan but what car was it fitted to?
what cars suffix code is F0?

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I bought a truck and am not quite sure what the engine came out of the numbers I have located are 355989(939),F0419CRA,17KS3S170, will any of these tell me what this engine came out of?????

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

the 355989 could be 355909? which is a 262 or 305 engine.

visit my shed
>E-mail Me

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

I have a 454 mid to late 80's that came out of a truck. I found a number on the front passenger side of the engine; cas181089. Anybody have any ideas? I can not get to the block number do to the firewall clearence is very minimal in the street rod.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

WANTED

350 standard bore cast aluminum DISH pistons
made in mexico stamped inside of piston skirt
henko en mexico

contact ME IF YOU WANT TO SELL THEM
blackdragster@comcas...

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

i have a m01311vp stamped on my engine pad what does the vp stands for

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Add new comment

Filtered HTML

  • Allowed HTML tags: <a> <strike> <blink> <i> <u> <br> <b>
  • Filtered words will be replaced with the filtered version of the word.
  • Lines and paragraphs break automatically.
  • Web page addresses and e-mail addresses turn into links automatically.

Plain text

  • No HTML tags allowed.
  • Filtered words will be replaced with the filtered version of the word.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Comment attachments
Files must be less than 100 MB.
Allowed file types: jpg jpeg gif png txt pdf bmp mov mp4 mp3 avi.
CAPTCHA
This question is used to make sure you are a human visitor and to prevent spam submissions. Email rusty@oldholden.com if you have a problem.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.