You are here

VK 5 speed into HZ

Hi guys thinking of putting a VK 5 speed into my HZ 202 will it be a straight forward fit will it match the floor hole and console ?.

Model: 
Engine: 
Section: 

Comments

I've got a vk 5 speed in my hk. Box uses the same crossmember and shifter location as an aussie box. Shifter does sit a bit higher tho so the floor may need massaging.
Clutch plate is a normal blue motor one, no reason why you couldn't use a red one and spigot and pull clutch.
Tailshaft is a touch shorter and uses a different output shaft spline so you must shorten the shaft and get the right yolk thingy.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Would you post up some Photos?

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

Are you talking about using that Filipino pos that came out behind the 2.85 only waste of time they were a horrible box you'll regret it if you do. Edit as vk didn't have the 2.85 I must of never seen a vk 5 speed I don't like the vh 5 speed.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Do a trade son you'll all ways get work. What a load of shiit that turned out to be.

Pretty sure its a borg warner box

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Vk box is not related to the filipiFilipino box. It is a euro built box related to the t5.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Check the 1st gear Ratios.

I wouldn't want 1st to be lower than you have now.

If it is, then I'd change the diff ratio to preserve 1st and raise 5th.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

First is 3.19 to 1, aussie 4 speed 3.05 to 1. 2nd and 3rd are far better than the aussie box plus the .79 to one overdrive.
Personally running a vl 3.45 diff and hot 186 and gearing is perfect.
For aa 202 a 3.36 would probably work well.
Will get a picture when I get home.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Many Thanks.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

Add new comment

Filtered HTML

  • Allowed HTML tags: <a> <strike> <blink> <i> <u> <br> <b>
  • Filtered words will be replaced with the filtered version of the word.
  • Lines and paragraphs break automatically.
  • Web page addresses and e-mail addresses turn into links automatically.

Plain text

  • No HTML tags allowed.
  • Filtered words will be replaced with the filtered version of the word.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Comment attachments
Files must be less than 100 MB.
Allowed file types: jpg jpeg gif png txt pdf bmp mov mp4 mp3 avi.
CAPTCHA
This question is used to make sure you are a human visitor and to prevent spam submissions. Email rusty@oldholden.com if you have a problem.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny1
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.