You are here

VK 5 speed into HZ

Hi guys thinking of putting a VK 5 speed into my HZ 202 will it be a straight forward fit will it match the floor hole and console ?.

Model: 
Engine: 
Section: 

Comments

I've got a vk 5 speed in my hk. Box uses the same crossmember and shifter location as an aussie box. Shifter does sit a bit higher tho so the floor may need massaging.
Clutch plate is a normal blue motor one, no reason why you couldn't use a red one and spigot and pull clutch.
Tailshaft is a touch shorter and uses a different output shaft spline so you must shorten the shaft and get the right yolk thingy.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Would you post up some Photos?

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

Are you talking about using that Filipino pos that came out behind the 2.85 only waste of time they were a horrible box you'll regret it if you do. Edit as vk didn't have the 2.85 I must of never seen a vk 5 speed I don't like the vh 5 speed.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Keep giving the country away grandpa suck that yank off give something else to a gook.

Pretty sure its a borg warner box

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Vk box is not related to the filipiFilipino box. It is a euro built box related to the t5.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Check the 1st gear Ratios.

I wouldn't want 1st to be lower than you have now.

If it is, then I'd change the diff ratio to preserve 1st and raise 5th.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

First is 3.19 to 1, aussie 4 speed 3.05 to 1. 2nd and 3rd are far better than the aussie box plus the .79 to one overdrive.
Personally running a vl 3.45 diff and hot 186 and gearing is perfect.
For aa 202 a 3.36 would probably work well.
Will get a picture when I get home.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Many Thanks.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

T

My Shed

Holdenpaedia, they're the brakes Mate.

Add new comment

Filtered HTML

  • Allowed HTML tags: <a> <strike> <blink> <i> <u> <br> <b>
  • Filtered words will be replaced with the filtered version of the word.
  • Lines and paragraphs break automatically.
  • Web page addresses and e-mail addresses turn into links automatically.

Plain text

  • No HTML tags allowed.
  • Filtered words will be replaced with the filtered version of the word.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Comment attachments
Files must be less than 100 MB.
Allowed file types: jpg jpeg gif png txt pdf bmp mov mp4 mp3 avi.
CAPTCHA
This question is used to make sure you are a human visitor and to prevent spam submissions. Email rusty@oldholden.com if you have a problem.
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny1
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.