You are here

brett1154's blog

FJ Holden headlight switch wiring diagram

Hi I was wondering if anyone has a FJ Holden headlight switch wiring diagram? the old harness was cactus so everything needs rewiring from scratch, should be easy enough lol

Model: 
Topic: 
Engine: 
Section: 

wanting to make ej holden clutch cable not hydrolic

Hi I have an ej Holden that I am putting a Celica 5 speed in and was wondering how easy is it to change the clutch to a cable? any help is great regards Brett

Model: 
Topic: 
Engine: 
Section: 

Can anyone tell me what holley I have

I bought a redline Holden red 6 manifold from gumtree and it came with a free Holley, just wondering if anyone knew what sort it is from this description.

looking down from the top numbers are 21 6R 5275

other Pattern pending number on side is 2268409

up the top on side are list-7718 1103

Also on the side is a black round dial that has lean and an arrow on it and on the face of that is 2 wire connections.

The manifold and Holley both only set me back $30 so if I can get away with re kitting and a polish and using I will.

Model: 
Topic: 
Engine: 
Section: 

Wanted fj ute tailgate

Hi All I am chasing a Fj ute tailgate, outer skin unimportant but prefer good frame if possible.
I live near Ipswich Queensland but would freight from anywhere if needed.
Please reply if you have one or possibly know where I might find one, regards Brett

Model: 
Topic: 
Engine: 
Section: 

FX ON GUMTREE WHAT ARE YOUR THOUGHTS

Hi All I seen this fx on gumtree well over my price range and was wondering what you all think and if you think this is going a little to far with the old classic

http://www.gumtree.c...

Model: 

Queenslands new regestration laws regarding old holdens

I was just wondering if someone could clarify the new registration laws in Queensland for me?
Say I had an FJ Holden and wanted to put another 6 cylinder engine in is that ok?
Now would it be ok to put a v6 engine in it?
I have tried looking but have found no information regarding the new engine sizes, I have heard at club meetings you can't put a v8 in if it never came out with one in the model or if it hasn't previously been registered that way.
But need some clarification regarding putting a v6 into an FJ Ute

Thanks again and I love this site, Brett

Model: 
Section: 

Wanted FX OR FJ HOLDEN UTE

I am after a new project car

A fx or fj holden ute please let me know if you have one or know somebody or somewhere I could find one.

Condition will depend on price and I am willing to fix whatever is needed to complete the project.

I am willing to travel to collect and any info you could help with would be appreciated.

Regards and thanks in advance

Model: 

please help 202 fuel injection issues

I have a fuel injected 202 black motor I am trying to run on my start up stand.

The fuel goes through the pump up to the regulator then stops and does not continue to the fuel rail.

I have replaced the fuel pump and regulator but the fuel still stops once it gets there, do I need to bleed it or is it to do with the vacuum pipe on the end of the regulator stoping the fuel from getting through?

When I tip fuel down the throttle body the engine fires but that's bypassing the injectors and fuel rail.

Model: 
Topic: 
Engine: 
Section: 

fj holden body tag paint codes

Hi all I am just needing some help with the paint code and trim code on this fj ute.

style fj2106
body 5694
trim 33-274
paint 253-16210
top acc 6

All help appreciated regards Brett

Model: 
Topic: 
Engine: 
Section: 

can anyone tell me the correct kits for holden stromberg

Hi all I have purchased a set of twin strombergs for my 202 Holden project and want to re kit them but can't find the correct kit numbers for the fuel miser kits, all the shops around here want to sell me different kits but I thought I would ask here first
the numbers on the carbs are 2376068 and there 1,3,32 and on the base it has 2376050 bxuv-2
can anyone tell me the correct kits I need and what there originally off
any help with the jet sizes for a hot 202 would also help
regards Brett

Model: 
Engine: 
Section: 

Wanted Ej Holden Eye Brow Trims

Wanted Ej Holden Eye Brow Trims good condition with pins, willing to collect around the Ipswich or Brisbane area or willing to pay for postage

Model: 
Topic: 

Can anyone tell me how to navigate old posts on this site

Rather than ask all questions that have been previously asked before can I search old posts of topics I am after? eg- ej holden door assembly, it has been 2 years since I pulled the inner workings out and wanted some reassurance before I try putting them back together.
Regards Brett

Model: 
Topic: 

Wanted EJ / EH Bumper bar over ridders ( one pair)

I want to purchase a set of ej/eh bumper bar over riders, prefer straight with ok chrome but would settle for getting rechromed. I live in Ipswich Qld but would pay postage if needed, please let me know if you or anyone you know has a set. Thanks

Model: 
Topic: 
Engine: 
Section: 

I want to put mirrors under my bonnet, what should I use?

Hi All again, I want to install mirrors under the bonnet of my ej sedan in the triangles that are there to give a motor reflection, it would need to withstand the heat as I intend on driving the car but just weekends and cruising.
Has anyone done this and what did you use? I was going to use mirrored Perspex but worried it would melt. please send all your thoughts through

Model: 
Topic: 
Engine: 
Section: 

ej holden door courtesy light wiring

Hi just wondering if any body could shed some light on my ej holden interior light problem
I have the 2 wires heading up to the dome to make the light these I know go into the rear light switch, I have no idea what powers them and why they turn on and off with the doors opening, I have the 2 little activators that work when the doors open but where do the wires go. can anyone explain the wiring or point me somewhere where I can find out? cheers

Model: 
Topic: 

Ej Holden sedan Boot and locks, what other old holdens fit?

Hi I was wondering what other model locks fit an Ej Holden sedan? All I know is that the ej and eh are different with the boot locks but not sure what models will fit. Also I am having trouble getting a set that has the ignition, boot and doors all matching is that normal? All help appreciated.

Model: 
Topic: 

HR PBR Brake calipers are they hard to rekit?

Hi Guys I am wanting to re kit the HR PBR brake callipers for the front of my EJ project and was wondering if the pistons are hard to get out and what's involved in re kitting them?

Model: 
Topic: 
Engine: 
Section: 

Whats the best carby for a worked 202 red motor

Hi All I was wondering the best carbie to use for a red 202 with the following work.
roller rockers on a stage 3 186 Yella terra head, 40 thou over flat top pistons, straight cut timing gear, 35/75 cam.
I have a 350 Holley that needs a rebuild but I really like the look of the twin strombergs on old Holdens, what are you suggestions, I hear the webers are good but have flat spots, triples are a night mare for tuning
I was wondering the performance of twin strombergs are they any good or would a 350 or 500 Holley be better?
All comments and opinions invited

Model: 
Engine: 

My ej the day I bought it

Model: 
Engine: 
Section: 

Whats the best way to measure 202 compression? plugs in plugs out

Whats the best way to measure 202 compression? plugs in plugs out, Also how do I work out the compression ratio?

Model: 
Engine: 
Section: