You are here

Archive - Nov 29, 2012 - story

Vk 4 speed

Hi all,
Quick question. I have a vk sedan 6cyl carb 4 speed torque master. It's on a farm so it doesn't have to pass rego. Will the Aussie 4 speed from a red 6 bolt straight up to the bell housing or will I need the m20 bell housing as well.

If I was to change to a m20 box, will the tail shaft yoke still fit, and tail shaft length be ok?
cheers

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

HZ Front drivers door

Hi all,

Wondering if anyone in the Sydney (Campbelltown) area has a good RHF door to suit a HZ tonner. Mine has ripples in it from previous repairs / welding up trim holes, not done by me. I could probably fix it but........

Not looking for a door to suit "GTS", "Monaro", "SS", or that is "NOS, Genuine, Rare", or otherwise EBay priced. Just a pretty good Kingswood door for reasonable money.

Let me know what you've got.

Cheers

Kev

308hjute@oldholden.com

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Quality Of Life...!

Well, it's finally on order....

http://www.rarespare...

It seems small, but when I fit this baby I'm gonna be smiling broadly, everywhere I go.
My life will improve substantially when I finally, again:
* have a horn that works,
* a nice firmly operating blinker wand, and
* a totally smooth steering column bearing.

Model: 
Topic: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

three on the tree problems

Hi all,
i went on a crusade early last night and fixed all the issues i still had with the hq, this was mainly electrical stuff but i had the bright idea or spraying some wd40 down the top of the column to try and free her up a little, somehow, it did the exact opposite. the mechanism started jamming like never before and in the top of the column.

so now the thing is in a million pieces and im filing bits square again and deburing things but she seems to worn to bother putting back together. seems like the issue uis that the tube jams in the top bushes because they are soo flogged its able to slip sideways.

im wondering weather anyone can get around this or im looking for a 'better' column.

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

removing window tint

Not on an old holden but a 1992 landcruiser ute I am about to get a roadworthy on.Got to come off as I can't see the rear view mirror through the film.Thanks for any hints.
cheers ...Jack J

Model: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Fuel pump or regulator or something else???

G'day everyone

So, moving the ute on and off the trailer and its getting low on juice, and I mean REAL low (no fuel in the filter)- filled it up on the way home and go to unload it, no joy it wont start ... and hasn't since.

I've got the electric fuel pump jumped straight off the battery at the moment (yes it is on a fuse!) and its making all the right noises and it picked up the fuel (fuel filter is now full). So, check for fuel pressure on the gauge has some but not much (its set real low because of the SUs). Check for spark just in case, chucked the timing light on and its strobing so theres spark at the leads.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

strange knock

hey guys,

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

shed

http://gallery.oldho...

stay tuned guys more pics coming soon!

Model: 
Topic: 
Engine: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.