You are here

Archive - Dec 6, 2019

Paint Colour

Hi guys.
Been a long time since I’ve been on here...

I’m after some paint info for an FJ.
My paint code is 253-16321.
When doing a google search on the dulux colour 6321 it comes back as a brown colour. I rang dulux and on their record sl it have 3 options. One is a baby blue colour, and then two brown colours.
Can anyone give me a colour for this.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Cam change with engine still in car?

Hey guys, Just wondering if it's possible to do a cam, lifters and timing chain swap on a HJ Statesman without pulling the engine?
Thanks for any advice.

Model: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Front Brakes(LHS and RHS) of HZ '78 Sedan Locked On

Hi Everyone, I've got a '78 HZ sedan with a 202 trimatic. When I pressed the brake I found that both the LHS and RHS brakes locked on. The only way they would release was when I released the pressure via the bleed screw. Thought it was the clearance between the booster and the master cylinder. No. Then I thought it was a blockage in the brake master cylinder. No. Then I thought it was the pistons stuck in the front brake calipers. No. I then pulled apart the proportioning value and found it was completed blocked up with gunk, had a torn o-ring and seized up.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

202 Auto stammering in gear and running rough.

So I've got a 202 blue with a trimatic behind it. Running a varajet manifold and using an adaptor plate for the carbie. I'd had this issue where the motor was stammering, like there was some kinda major miss going on there, but in park or neutral it didn't seem as bad "although I'm sure it was still happening". It was running bloody rough as guts! Today I thought I'd really investigate it. Thought of what possible probs could be going on so I:

Installed brand new manifold gasket and tightened the guts out of it! - No difference!

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.