You are here

Archive - Oct 15, 2019

Rusted screws

I had to remove some rusted in phillips head screws today on the Suzuki back bumper.
The screw driver just turned in the rusty head of the screws, so I decided to grind the heads off them so I could separate the parts.
After I had ground about 1mm off the head and they were hot both screws came loose.
One of them had just enough of the cross left so I could undo it with the screwdriver, the other I gripped with pliers and wound it out.
Getting them out was a lot easier than I thought it was going to be.

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.