Hi all, about a year ago I replaced the clutch, pressure plate and throw out bearing on my HR. All has been well since. The clutch plate didn't look too bad but it was slipping badly so I suspect the old pressure plate was the culprit.
published by Holden Fan (not verified) on Mon, 17/04/2017 - 14:40
Hi all my problem is my rpm tacho goes all the way past redline as far as it can go on the tacho face and stays there. with the ignition on but engine not running or engine running makes no difference. i pull the green sender wire off negative side of coil and makes no difference. the black wire has a good ground. any idears lads. thanks john