Looking at spraying under the ute and all the little nooks and crannys i can get to with fish oil.. Can someone suggest a brand of fish oil that dries well and one that dont stink like a barrel of burley...thanks
published by Old is good on Sun, 29/01/2017 - 17:19
Got the EH back with the new clutch and it's all good, almost.
Every now and then over the last month or so my oil pressure would drop.
When I took it over to get the clutch done it dropped down to a steady 20PSI. It's usually 40PSI hot.
When I drove it home I had no pressure at all. I assumed it was the gauge.
I checked all the wires (electric gauge) and the fuse. The gauge and sender are Speco, about 6 years old.
There is plenty of oil in the motor.
The sender is not leaking.
published by Holden Fan (not verified) on Sun, 29/01/2017 - 10:36
Hi guys , I want to build up a hot 253, want to stroke it, 310 or 330, want it to rev above 7000,will be running in a one tonner, just wondering if anyone here has done it , where did you source parts, what was end result, thanks