You are here

Archive - Jul 25, 2016

Cluth Plate

What is the largest diameter clutch plate/pressure plate that will bolt up to a six cylinder flywheel?
Was there a 240mm (9 1/2") available?
Thanks in advance.

Cheers, Mick.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Spigot bearing installation

Hi guys. Any good threads around on spigot bearing installation? I've just bought a new spigot bearing from Dellow to put into the vt motor crank to suit my supra box. I noticed the old spigot on the wb turbo block crank is different. The old spigot had a wide face and lip controlling the seating depth. I'm worried now the new one will be the wrong depth if i seat it flush.
I'm wondering if i may need to buy a different bush and how to install it correctly

Model: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

HONE VAN NUMBER 1

Hi All!
The Van has a new muffler fitted being supplied by Settlement Road Exhaust in Thomastown, Victoria. Only $42 freight to Blackbutt in Qld! Fitted perfectly too.
Also fitted a new pivot and plungers for the top tail gate as well as new cables for the bottom tail gate. However, I am missing the large countersunk screw on one of the cable brackets on the gate. Anyone have a spare? I haven't checked if anyone sells new ones?
The manifolds are off now to drill out the studs on the flange and replace with new ones. The faces on the exhaust manifold will be skimmed while they are off.
I will need a complete new wiring harness too. Anyone know a supplier? I've checked a few websites to no avail.

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

HELP With 350sbc Build

Hi Everyone,

IF there are any knowledgeable engine builders or someone that really really knows there stuff about 350chevs your HONEST HELP is needed.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.