You are here

Archive - Sep 5, 2012

WB ute wiring fault follow up

Evening everyone.

Just as a follow up from my previous thread from two months ago I finally got the chance to get stuck into the wiring on the ute.

For starters, the battery will not hold charge, so I will exchange it for another at the weekend.

I have removed the fuses and relays form the engine bay relating to the spotlights and the LPG system, but can't test until I sort out the biggest problem with the wiring.

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

FB / EK Two speed wiper conversion

Has anybody has any experience of these two speed wiper conversions from Castle Auto?
http://www.castleaut...
An old bloke up here has to get two speed wipers for his daughter's modified EK. I'd like to know this conversion is OK before I tell him about it.

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Resto Snack for the HK Monaro Boys

HK Monaro GTS across the Dutch (NZ) Reserve Met at $750.

http://www.trademe.c...

Regards Rockett

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

EH Ute Venetian Blind Screws

G'day Lads,
Im trying to track down some small venetian blind/auto shade screws for my EH ute. They are counter sunk with an internal thread. I have tried rare spares and a few different fastener specialists. Just wondering if anyone knows where I can source some of these?

Model: 
Topic: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

EH sedan Shell wanted

anyone in the know of someone with a EH sedan shell they no longer want ?

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Torana Progress

Pulled the rear screen from the LX today as I need to change headlinings etc...anyway found a little rust and a few tiny holes under where the rubber sits. Not upset at all as it is very minor and I had a hint something was a miss as there were some bubbles on the RHS of the rear screen so I was keen to pull the screen, even if the headlining didn't need changing. Just got back from cleaning it all up with a wire wheel and gave it a hit with the rust convertor.

I needed to butcher the screen seal to get it out so I'm going to order one of them and may as well get a front one also. When the pro comes over to install the front screen (do I need a pro?) do they just bring the glass and use the seal that I provide or bring everything?

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

VT Wheel Nuts Wanted

Looking for a set of VT Commodore wheel nuts, happy to swap a set of HQ nuts or cash, prefer North Brisbane to Sunny Coast.

Also looking for a set of VT wheel trims if anyone in the area has any please call or text 0412732347.

I believe I have about 65 standard HQ nuts as well as some mag nuts in varying shapes if anyone needs some.

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Hq big brakes

http://www.ebay.com.... I'v used the hopers setup wich I am very impressed with, and now im looking for a second set of big ones for the gts... very well priced at $1088 wich are about 200 bucks less than the hoppers ones I got a few years back and these are a big brand name and 4 spot ! Any one tried the Wilwood's yet ?

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Holley 4 barrel carbs

Hi Guys, comments please, i purchased a 650 vac sec holley for my 307. its an 807 numbered carb.

it appears this model is designed for a 454 at 7000 rpm if you go by the charts..

i should have got a 600 cfm 804 carb

anyone want to swap?

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

$$ HK Monaro Personalised Licence Plates $$

  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

LH LX TORANA chassis

hi everyone do the LH LX tornan chassis unbolt from the body ??

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Slim chance?

Snooping about again for a steering box...

Does anyone have a 'box from an HK-T-G that had power steering? It's the same as that out of a GTS spec Monaro, and has the 'quicker' 16.5:1 ratio, instead of the standard 20:1 .

Yep, I know - they're more rare and expensive than the standard version, but I have a bit of a budget to play with...

Ta!

HK'ing.

Image: 
Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.