You are here

Archive - 2009

December 31st

LS1_Tonner

Hi All, Another year done, Hope we all have a good and safe 2010.
I am in Perth, and have an HZ Tonner with an LS1 and 6spd, at the moment has the standard diff(3.08 I think)which is way to tall for the 6spd. Does any body out there have at least a 3.55, or some info on another diff to fit. need to have something freighted to WA. Can't seem to find much here.
Cheers
Neville-LS1_Tonner

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

vk belina

hi all
have just purchased a vk 5litre 4 speed that has been stored in a shed for 8 years a country car with no rust
would like you guys to de code tags for me cheers

model vk8vl19-234

body 191685-0

trim 3054-15p

paint if 086-d

engine lv2

trans m21

axle gu4

build 10/85

bvk052777a

would also like to know what the spec is for the 234 pack as it has hdt grille and air dam also has side skirts .it has the SS stickers on the boot and guards was this a dealer special maybe thanks for you help

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Which roller rockers are better for a high performance 6?

#1= http://cgi.ebay.com....

#2= http://cgi.ebay.com....

Can someone tell me which set would be good for greater performance.

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Wanted: Phil Irving inlet manifolds

Hi, still chasing inlet manifold or any leads to finding some.

cheers

Steve

0427197267

chevnut1@bigpond,com

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

wanting a holden shell ect

hi, im chasing a new project - prefere fx through to hr or maybe torana , will be happy with a rolling shell ect , email me with what u have - how much . ph 0411159633 asap , can pickup around brissy- gold coast - sunny coast , or north of bundy

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

HQ drag link

do drag links wear out?

the 1 out of the ambo is a inch thick with grease, how do i check if it still ok to use? or should i just replace it?

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Clear Coat over top coat?

Hi guys i just bought the paint for the car but i didnt get clear coat. Should i get some to put over the top of the paint or isnt it necasary.Cheers Alex

Model: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Camshaft ?

Have a HZ one tonne ute i am restoring for my son. It has a 186 in it and stamped on the fromt of the cam shaft is 'CE 661".
Does anyone know what this cam is?

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Good trimmer in Western Sydney

Anyone know of a good trimmer in Western Sydney?

It's time to get the trim done in my HQ Belmont and I want to get it done in a traditional period correct style.

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

got this printed today

got 2 printed out, and 1 laminated, all up $23
size is 840mm X 1190.
About 10 years ago, i got same printed out, and from memory a printout and laminate was close to $60. I got as far as getting the tubes bent, ready to weld and then was offered a good price I couldn't refuse)

Image: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Powerglide to Manual

Guys and Girls
Thinking of changing the powerglide out of the GTS 307 and replacing it with a manual box. The auto is ok but would prefer the drivability of a manual. Was thinking of putting in a T5 to give a good cruising 5th gear. Any thoughts, anyone done this, CRS bellhousing kit? not sure what I'll need
Cheeres Ted

Model: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Spark plugs

I removed the plugs of my stock 202 head and went to put them in my yella terra head but they wouldnt go in? Does the yella terra head take a different threaded plug? If so what ones do I get?

Thanks

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

anyone have any of these

Image: 

does anyone have any of these laying around you want to sell? there the insides to the [http://gallery.oldho...|body mount rubbers] and also the radiator support panel rubbers

the ones from the ambo are like the one on the left (the one in the pic is 1 of them), the one on the right is from a good radiator support panel i have here

i need 10 good ones, will take rubber as well if there good, i'm in no hurry for them, just collecting parts as i go, must be cheap as i'm on a tight budget

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Parts - Brands that are ok and ones to avoid ?

Hunting around for parts to rebuild my 253.

Are ACL and Federal Mogal Ok, the auction listing says new old stock?

Would this be correct?

Link is here--->>> http://cgi.ebay.com....

Model: 
Topic: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

HT 6cyl powerglide to V8 trimatic

I am about to remove a six from my HT (202 with column shift powerglide) to install a V8 (VL commodore 308 + early V8 trimatic with drivers side shift linkage).

Now what is the easiest way to set up the shift linkage as the 6cyl powerglide linkage is on the passenger side (has a rod that goes from drivers side to passenger side of trans). Do I need to buy the V8 shift linkages?

Also, what is the easiest way to set up the cable kickdown as I also don't have the V8 brackets etc for this either?

Thanks
Paul

Model: 
Engine: 
Section: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

lowering a ht

Hey all,?
whats involved in lowering the front of a ht ?
is it as simple as shorter springs and shocks or do you need to get involved in off-set control arm bushes and camber kits?
will putting lowering blocks in the arse give me a too rough a ride or should i get lowered leafs?
Luke

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

WTB: 1 x Hotwire rim 14x7 suit HQ-HZ, in Perth

G'day guys

Have a set of hotwire rims for my Stato but one is suspect (the bolt holes have half the meat in them than the others and I have to use 3 washers on the mag nuts just so the nuts dont bottom out before it pulles the rim tight!) Lesson lernt for me, when buying something out of the paper look at it then check it again, this one slipped through, Doh.

So if any one in perth has a 14x7 hotwire rim they can part with preferably in Perth to suit a HQ-HZ please email me on fletch350308 @ hotmail.com (minus the spaces)

Cheers

Fletch

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

me new ute

Image: 

i brought this ute a while ago, i drove it home yesterday (with a permit) it is a factory 253 4 speed manual, drive line is in top condition but body is badly rusted in ALL the usall spots, cab is quite bad and most likely beyond repair

i will need a replacement cab to fix it but the boss says i have to finish the ambo first before touching this one, if anyone in the ballarat (or surrounding area) ever comes accross a good cheap cab then please let me know

Model: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Knox carpets

GF

Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

wanted and for sale

wanted chev 307 or 350 and powerglide
also wanted hk sedan - must have good floor outside condition negotiable.

for sale -
ht hg 308 or 253 fan shroud good condition some damage on mounting holes.
hd/hr x2 air cleaner
ht black brougham door trims restorable condition
hk brougham rolling shell (will swap for hk kingswood)
complete ht or hg floor
ht / hg premier subframe minor rust
trailer "A" frame
6 x hktg ute / wagon tailights
full set of hg ht premier badges
ht hg 253 air cleaner
16.7 ratio steering box
sedan front and rear windows

free to good home (pickup only)
ek tailgate
steel shelving x 10 600mm x 40mm approx
hd / hr radiator
lengths of 1' x 3' hardwood timber suitable for firewood approx 20

pickup central west NSW

Model: 
Topic: 
  • Like0
  • no like0
  • Holdenpaedia idea0
  • Funny0
  • Wrong Category0
Please use, Holdenpaedia will get the first box on the left side. Post any suggestions.

Pages